ttk::widget manual page - Tk Themed Widget

Command-Line Name: -class
Database Name: undefined
Database Class: undefined: Specifies the window class. The class is used when querying the option database for the window's other options, to determine the default bindtags for the window, and to select the widget's default layout and style. This is a read-only option: it may only be specified when the window is created, and may not be changed with the configure widget command.
Command-Line Name: -cursor
Database Name: cursor
Database Class: Cursor: Specifies the mouse cursor to be used for the widget. See Tk_GetCursor and cursors(n) in the Tk reference manual for the legal values. If set to the empty string (the default), the cursor is inherited from the parent widget.
Command-Line Name: -takefocus
Database Name: takeFocus
Database Class: TakeFocus: Determines whether the window accepts the focus during keyboard traversal. Either 0, 1, a command prefix (to which the widget path is appended, and which should return 0 or 1), or the empty string. See options(n) in the Tk reference manual for the full description.
Command-Line Name: -style
Database Name: style
Database Class: Style: May be used to specify a custom widget style.

SCROLLABLE WIDGET OPTIONS

The following options are supported by widgets that are controllable by a scrollbar. See scrollbar(n) for more information

Command-Line Name: -xscrollcommand

Database Name: xScrollCommand

Database Class: ScrollCommand

A command prefix, used to communicate with horizontal scrollbars. When the view in the widget's window changes, the widget will generate a Tcl command by concatenating the scroll command and two numbers. Each of the numbers is a fraction between 0 and 1 indicating a position in the document; 0 indicates the beginning, and 1 indicates the end. The first fraction indicates the first information in the widget that is visible in the window, and the second fraction indicates the information just after the last portion that is visible.

Typically the -xscrollcommand option consists of the path name of a scrollbar widget followed by “set”, e.g. “.x.scrollbar set”. This will cause the scrollbar to be updated whenever the view in the window changes.

If this option is set to the empty string (the default), then no command will be executed.

Command-Line Name: -yscrollcommand

Database Name: yScrollCommand

Database Class: ScrollCommand

A command prefix, used to communicate with vertical scrollbars. See the description of -xscrollcommand above for details.

LABEL OPTIONS

The following options are supported by labels, buttons, and other button-like widgets:

Command-Line Name: -compound

Database Name: compound

Database Class: Compound

Specifies how to display the image relative to the text, in the case both -text and -image are present. If set to the empty string (the default), the rules described in the "Elements" section of ttk::intro(n) explain which value is actually used. The other valid values are:

text: Display text only.
image: Display image only.
center: Display text centered on top of image.
top
bottom
left
right: Display image above, below, left of, or right of the text, respectively.
none: Display the image if present, otherwise the text.

Command-Line Name: -font

Database Name: font

Database Class: Font

Font to use for the text displayed by the widget.

Command-Line Name: -foreground

Database Name: textColor

Database Class: TextColor

The widget's foreground color. If unspecified, the theme default is used.

Command-Line Name: -image

Database Name: image

Database Class: Image

Specifies an image to display. This is a list of 1 or more elements. The first element is the default image name. The rest of the list is a sequence of statespec / value pairs as per style map, specifying different images to use when the widget is in a particular state or combination of states. All images in the list should have the same size.

Command-Line Name: -padding

Database Name: padding

Database Class: Padding

Specifies the internal padding for the widget. The padding is a list of up to four length specifications left top right bottom. If fewer than four elements are specified, bottom defaults to top, right defaults to left, and top defaults to left. In other words, a list of three numbers specify the left, vertical, and right padding; a list of two numbers specify the horizontal and the vertical padding; a single number specifies the same padding all the way around the widget.

Command-Line Name: -text

Database Name: text

Database Class: Text

Specifies a text string to be displayed inside the widget (unless overridden by -textvariable).

Command-Line Name: -textvariable

Database Name: textVariable

Database Class: Variable

Specifies the name of a global variable whose value will be used in place of the -text resource.

Command-Line Name: -underline

Database Name: underline

Database Class: Underline

If set, specifies the integer index (0-based) of a character to underline in the text string. The underlined character is used for mnemonic activation.

Command-Line Name: -width

Database Name: width

Database Class: Width

If greater than zero, specifies how much space, in character widths, to allocate for the text label. If less than zero, specifies a minimum width. If zero or unspecified, the natural width of the text label is used.

COMPATIBILITY OPTIONS

This option is only available for themed widgets that have “corresponding” traditional Tk widgets.

Command-Line Name: -state
Database Name: state
Database Class: State: May be set to normal or disabled to control the disabled state bit. This is a write-only option: setting it changes the widget state, but the state widget command does not affect the -state option.

COMMANDS

pathName cget option

Returns the current value of the configuration option given by option.

pathName configure ?option? ?value option value ...?

Query or modify the configuration options of the widget. If one or more option-value pairs are specified, then the command modifies the given widget option(s) to have the given value(s); in this case the command returns an empty string. If option is specified with no value, then the command returns a list describing the named option: the elements of the list are the option name, database name, database class, default value, and current value. If no option is specified, returns a list describing all of the available options for pathName.

pathName identify element x y

Returns the name of the element under the point given by x and y, or an empty string if the point does not lie within any element. x and y are pixel coordinates relative to the widget. Some widgets accept other identify subcommands.

pathName instate statespec ?script?

Test the widget's state. If script is not specified, returns 1 if the widget state matches statespec and 0 otherwise. If script is specified, equivalent to

if {[pathName instate stateSpec]} script

pathName state ?stateSpec?

Modify or inquire widget state. If stateSpec is present, sets the widget state: for each flag in stateSpec, sets the corresponding flag or clears it if prefixed by an exclamation point.

Returns a new state spec indicating which flags were changed:

set changes [pathName state spec]
pathName state $changes

will restore pathName to the original state. If stateSpec is not specified, returns a list of the currently-enabled state flags.

pathName xview args

This command is used to query and change the horizontal position of the content in the widget's window. It can take any of the following forms:

pathName xview: Returns a list containing two elements. Each element is a real fraction between 0 and 1; together they describe the horizontal span that is visible in the window. For example, if the first element is .2 and the second element is .6, 20% of the widget's content is off-screen to the left, the middle 40% is visible in the window, and 40% of the content is off-screen to the right. These are the same values passed to scrollbars via the -xscrollcommand option.
pathName xview index: Adjusts the view in the window so that the content given by index is displayed at the left edge of the window.
pathName xview moveto fraction: Adjusts the view in the window so that the character fraction of the way through the content appears at the left edge of the window. Fraction must be a fraction between 0 and 1.
pathName xview scroll number what: This command shifts the view in the window left or right according to number and what. Number must be an integer. What must be either units or pages. If what is units, the view adjusts left or right by number average-width characters on the display; if it is pages then the view adjusts by number screenfuls. If number is negative then characters farther to the left become visible; if it is positive then characters farther to the right become visible.

pathName yview args

This command is used to query and change the vertical position of the content in the widget's window. It can take any of the following forms:

pathName yview: Returns a list containing two elements. Each element is a real fraction between 0 and 1; together they describe the vertical span that is visible in the window. For example, if the first element is .2 and the second element is .6, 20% of the widget's content is off-screen to the top, the middle 40% is visible in the window, and 40% of the content is off-screen to the bottom. These are the same values passed to scrollbars via the -yscrollcommand option.
pathName yview index: Adjusts the view in the window so that the content given by index is displayed at the top edge of the window.
pathName yview moveto fraction: Adjusts the view in the window so that the item fraction of the way through the content appears at the top edge of the window. Fraction must be a fraction between 0 and 1.
pathName yview scroll number what: This command shifts the view in the window up or down according to number and what. Number must be an integer. What must be either units or pages. If what is units, the view adjusts up or down by number average-width characters on the display; if it is pages then the view adjusts by number screenfuls. If number is negative then items farther to the top become visible; if it is positive then items farther to the bottom become visible.

WIDGET STATES

The widget state is a bitmap of independent state flags. Widget state flags include:

active: The mouse cursor is over the widget and pressing a mouse button will cause some action to occur. (aka “prelight” (Gnome), “hot” (Windows), “hover”).
disabled: Widget is disabled under program control (aka “unavailable”, “inactive”).
focus: Widget has keyboard focus.
pressed: Widget is being pressed (aka “armed” in Motif).
selected: “On”, “true”, or “current” for things like checkbuttons and radiobuttons.
background: Windows and the Mac have a notion of an “active” or foreground window. The background state is set for widgets in a background window, and cleared for those in the foreground window.
readonly: Widget should not allow user modification.
alternate: A widget-specific alternate display format. For example, used for checkbuttons and radiobuttons in the “tristate” or “mixed” state, and for buttons with -default active.
invalid: The widget's value is invalid. (Potential uses: scale widget value out of bounds, entry widget value failed validation.)
hover: The mouse cursor is within the widget. This is similar to the active state; it is used in some themes for widgets that provide distinct visual feedback for the active widget in addition to the active element within the widget.

A state specification or stateSpec is a list of state names, optionally prefixed with an exclamation point (!) indicating that the bit is off.

EXAMPLES

set b [ttk::button .b]

# Disable the widget:
$b state disabled

# Invoke the widget only if it is currently pressed and enabled:
$b instate {pressed !disabled} { .b invoke }

# Reenable widget:
$b state !disabled

KEYWORDS

state, configure, option