- wm aspect window ?minNumer minDenom maxNumer maxDenom?
-
If minNumer, minDenom, maxNumer, and maxDenom
are all specified, then they will be passed to the window manager
and the window manager should use them to enforce a range of
acceptable aspect ratios for window. The aspect ratio of
window (width/length) will be constrained to lie
between minNumer/minDenom and maxNumer/maxDenom.
If minNumer etc. are all specified as empty strings, then
any existing aspect ratio restrictions are removed.
If minNumer etc. are specified, then the command returns an
empty string. Otherwise, it returns
a Tcl list containing four elements, which are the current values
of minNumer, minDenom, maxNumer, and maxDenom
(if no aspect restrictions are in effect, then an empty string is
returned).
- wm attributes window
-
- wm attributes window ?option?
-
- wm attributes window ?option value option value...?
-
This subcommand returns or sets platform specific attributes associated
with a window. The first form returns a list of the platform specific
flags and their values. The second form returns the value for the
specific option. The third form sets one or more of the values. The
values are as follows:
All platforms support the following attributes (though X11 users
should see the notes below):
- -alpha
-
Specifies the alpha transparency level of the toplevel. It accepts a value
from 0.0 (fully transparent) to 1.0 (opaque). Values outside that
range will be constrained. Where not supported, the -alpha value
remains at 1.0.
- -fullscreen
-
Places the window in a mode that takes up the entire screen, has no
borders, and covers the general use area (i.e. Start menu and taskbar on
Windows, dock and menubar on OSX, general window decorations on X11).
- -topmost
-
Specifies whether this is a topmost window (displays above all other windows).
On Windows, the following attributes may be set.
- -disabled
-
Specifies whether the window is in a disabled state.
- -toolwindow
-
Specifies a toolwindow style window (as defined in the MSDN).
- -transparentcolor
-
Specifies the transparent color index of the toplevel. It takes any color
value accepted by Tk_GetColor. If the empty string is specified
(default), no transparent color is used. This is supported on Windows
2000/XP+. Where not supported, the -transparentcolor value remains
at {}.
On Mac OS X, the following attributes may be set.
- -modified
-
Specifies the modification state of the window (determines whether the
window close widget contains the modification indicator and whether the
proxy icon is draggable).
- -notify
-
Specifies process notification state (bouncing of the application dock icon).
- -titlepath
-
Specifies the path of the file referenced as the window proxy icon (which
can be dragged and dropped in lieu of the file's finder icon).
- -transparent
-
Makes the window content area transparent and turns off the window shadow. For
the transparency to be effective, the toplevel background needs to be set to a
color with some alpha, e.g.
“systemTransparent”.
On X11, the following attributes may be set. These are not supported by all
window managers, and will have no effect under older WMs.
- -type
-
Requests that the window should be interpreted by the window manager as being
of the specified type(s). This may cause the window to be decorated in a
different way or otherwise managed differently, though exactly what happens is
entirely up to the window manager. A list of types may be used, in order of
preference. The following values are mapped to constants defined in the EWMH
specification (using others is possible, but not advised):
- desktop
-
indicates a desktop feature,
- dock
-
indicates a dock/panel feature,
- toolbar
-
indicates a toolbar window that should be acting on behalf of another window,
as indicated with wm transient,
- menu
-
indicates a torn-off menu that should be acting on behalf of another window,
as indicated with wm transient,
- utility
-
indicates a utility window (e.g., palette or toolbox) that should be acting on
behalf of another window, as indicated with wm transient,
- splash
-
indicates a splash screen, displayed during application start up,
- dialog
-
indicates a general dialog window, that should be acting on behalf of another
window, as indicated with wm transient,
- dropdown_menu
-
indicates a menu summoned from a menu bar, which should usually also be set to
be override-redirected (with wm overrideredirect),
- popup_menu
-
indicates a popup menu, which should usually also be set to be
override-redirected (with wm overrideredirect),
- tooltip
-
indicates a tooltip window, which should usually also be set to be
override-redirected (with wm overrideredirect),
- notification
-
indicates a window that provides a background notification of some event,
which should usually also be set to be override-redirected (with wm
overrideredirect),
- combo
-
indicates the drop-down list of a combobox widget, which should usually also
be set to be override-redirected (with wm overrideredirect),
- dnd
-
indicates a window that represents something being dragged, which should
usually also be set to be override-redirected (with
wm overrideredirect),
- normal
-
indicates a window that has no special interpretation.
- -zoomed
-
Requests that the window should be maximized. This is the same as wm state
zoomed on Windows and Mac OS X.
On X11, changes to window attributes are performed asynchronously. Querying
the value of an attribute returns the current state, which will not be the
same as the value most recently set if the window manager has not yet
processed the request or if it does not support the attribute.
- wm client window ?name?
-
If name is specified, this command stores name (which
should be the name of
the host on which the application is executing) in window's
WM_CLIENT_MACHINE property for use by the window manager or
session manager.
The command returns an empty string in this case.
If name is not specified, the command returns the last name
set in a wm client command for window.
If name is specified as an empty string, the command deletes the
WM_CLIENT_MACHINE property from window.
- wm colormapwindows window ?windowList?
-
This command is used to manipulate the WM_COLORMAP_WINDOWS
property, which provides information to the window managers about
windows that have private colormaps.
If windowList is not specified, the command returns a list
whose elements are the names of the windows in the WM_COLORMAP_WINDOWS
property.
If windowList is specified, it consists of a list of window
path names; the command overwrites the WM_COLORMAP_WINDOWS
property with the given windows and returns an empty string.
The WM_COLORMAP_WINDOWS property should normally contain a
list of the internal windows within window whose colormaps differ
from their parents.
The order of the windows in the property indicates a priority order:
the window manager will attempt to install as many colormaps as possible
from the head of this list when window gets the colormap focus.
If window is not included among the windows in windowList,
Tk implicitly adds it at the end of the WM_COLORMAP_WINDOWS
property, so that its colormap is lowest in priority.
If wm colormapwindows is not invoked, Tk will automatically set
the property for each top-level window to all the internal windows
whose colormaps differ from their parents, followed by the top-level
itself; the order of the internal windows is undefined.
See the ICCCM documentation for more information on the
WM_COLORMAP_WINDOWS property.
- wm command window ?value?
-
If value is specified, this command stores value in window's
WM_COMMAND property for use by the window manager or
session manager and returns an empty string.
Value must have proper list structure; the elements should
contain the words of the command used to invoke the application.
If value is not specified then the command returns the last value
set in a wm command command for window.
If value is specified as an empty string, the command
deletes the WM_COMMAND property from window.
- wm deiconify window
-
Arrange for window to be displayed in normal (non-iconified) form.
This is done by mapping the window. If the window has never been
mapped then this command will not map the window, but it will ensure
that when the window is first mapped it will be displayed
in de-iconified form. On Windows, a deiconified window will also be
raised and be given the focus (made the active window).
Returns an empty string.
- wm focusmodel window ?active|passive?
-
If active or passive is supplied as an optional argument
to the command, then it specifies the focus model for window.
In this case the command returns an empty string. If no additional
argument is supplied, then the command returns the current focus
model for window.
An active focus model means that window will claim the
input focus for itself or its descendants, even at times when
the focus is currently in some other application. Passive means that
window will never claim the focus for itself: the window manager
should give the focus to window at appropriate times. However,
once the focus has been given to window or one of its descendants,
the application may re-assign the focus among window's descendants.
The focus model defaults to passive, and Tk's focus command
assumes a passive model of focusing.
- wm forget window
-
The window will be unmapped from the screen and will no longer
be managed by wm. Windows created with the toplevel
command will be treated like frame windows once they are no
longer managed by wm, however, the -menu configuration will be
remembered and the menus will return once the widget is managed again.
- wm frame window
-
If window has been reparented by the window manager into a
decorative frame, the command returns the platform specific window
identifier for the outermost frame that contains window (the
window whose parent is the root or virtual root). If window
has not been reparented by the window manager then the command returns
the platform specific window identifier for window.
- wm geometry window ?newGeometry?
-
If newGeometry is specified, then the geometry of window
is changed and an empty string is returned. Otherwise the current
geometry for window is returned (this is the most recent
geometry specified either by manual resizing or
in a wm geometry command). NewGeometry has
the form =widthxheight±x±y, where
any of =, widthxheight, or ±x±y
may be omitted. Width and height are positive integers
specifying the desired dimensions of window. If window
is gridded (see GRIDDED GEOMETRY MANAGEMENT below) then the dimensions
are specified in grid units; otherwise they are specified in pixel
units.
X and y specify the desired location of
window on the screen, in pixels.
If x is preceded by +, it specifies
the number of pixels between the left edge of the screen and the left
edge of window's border; if preceded by - then
x specifies the number of pixels
between the right edge of the screen and the right edge of window's
border. If y is preceded by + then it specifies the
number of pixels between the top of the screen and the top
of window's border; if y is preceded by - then
it specifies the number of pixels between the bottom of window's
border and the bottom of the screen.
If newGeometry is specified as an empty string then any
existing user-specified geometry for window is cancelled, and
the window will revert to the size requested internally by its
widgets.
Note that this is related to winfo geometry, but not the same. That can
only query the geometry, and always reflects Tk's current understanding of the
actual size and location of window, whereas wm geometry allows
both setting and querying of the window manager's understanding of the
size and location of the window. This can vary significantly, for example to
reflect the addition of decorative elements to window such as title
bars, and window managers are not required to precisely follow the requests
made through this command.
- wm grid window ?baseWidth baseHeight widthInc heightInc?
-
This command indicates that window is to be managed as a
gridded window.
It also specifies the relationship between grid units and pixel units.
BaseWidth and baseHeight specify the number of grid
units corresponding to the pixel dimensions requested internally
by window using Tk_GeometryRequest. WidthInc
and heightInc specify the number of pixels in each horizontal
and vertical grid unit.
These four values determine a range of acceptable sizes for
window, corresponding to grid-based widths and heights
that are non-negative integers.
Tk will pass this information to the window manager; during
manual resizing, the window manager will restrict the window's size
to one of these acceptable sizes.
Furthermore, during manual resizing the window manager will display
the window's current size in terms of grid units rather than pixels.
If baseWidth etc. are all specified as empty strings, then
window will no longer be managed as a gridded window. If
baseWidth etc. are specified then the return value is an
empty string.
Otherwise the return value is a Tcl list containing
four elements corresponding to the current baseWidth,
baseHeight, widthInc, and heightInc; if
window is not currently gridded, then an empty string
is returned.
Note: this command should not be needed very often, since the
Tk_SetGrid library procedure and the setGrid option
provide easier access to the same functionality.
- wm group window ?pathName?
-
If pathName is specified, it gives the path name for the leader of
a group of related windows. The window manager may use this information,
for example, to unmap all of the windows in a group when the group's
leader is iconified. PathName may be specified as an empty string to
remove window from any group association. If pathName is
specified then the command returns an empty string; otherwise it
returns the path name of window's current group leader, or an empty
string if window is not part of any group.
- wm iconbitmap window ?bitmap?
-
If bitmap is specified, then it names a bitmap in the standard
forms accepted by Tk (see the Tk_GetBitmap manual entry for details).
This bitmap is passed to the window manager to be displayed in
window's icon, and the command returns an empty string. If
an empty string is specified for bitmap, then any current icon
bitmap is cancelled for window.
If bitmap is specified then the command returns an empty string.
Otherwise it returns the name of
the current icon bitmap associated with window, or an empty
string if window has no icon bitmap. On the Windows operating
system, an additional flag is supported:
- wm iconbitmap window ?-default? ?image?
-
If the -default
flag is given, the icon is applied to all toplevel windows (existing
and future) to which no other specific icon has yet been applied.
In addition to bitmap image types, a full path specification to
any file which contains a valid
Windows icon is also accepted (usually .ico or .icr files), or any
file for which the shell has assigned an icon. Tcl will
first test if the file contains an icon, then if it has an assigned
icon, and finally, if that fails, test for
a bitmap.
- wm iconify window
-
Arrange for window to be iconified. It window has not
yet been mapped for the first time, this command will arrange for
it to appear in the iconified state when it is eventually mapped.
- wm iconmask window ?bitmap?
-
If bitmap is specified, then it names a bitmap in the standard
forms accepted by Tk (see the Tk_GetBitmap manual entry for details).
This bitmap is passed to the window manager to be used as a mask
in conjunction with the iconbitmap option: where the mask
has zeroes no icon will be displayed; where it has ones, the bits
from the icon bitmap will be displayed. If
an empty string is specified for bitmap then any current icon
mask is cancelled for window (this is equivalent to specifying
a bitmap of all ones). If bitmap is specified
then the command returns an empty string. Otherwise it
returns the name of the current icon mask associated with
window, or an empty string if no mask is in effect.
- wm iconname window ?newName?
-
If newName is specified, then it is passed to the window
manager; the window manager should display newName inside
the icon associated with window. In this case an empty
string is returned as result. If newName is not specified
then the command returns the current icon name for window,
or an empty string if no icon name has been specified (in this
case the window manager will normally display the window's title,
as specified with the wm title command).
- wm iconphoto window ?-default? image1 ?image2 ...?
-
Sets the titlebar icon for window based on the named photo images.
If -default is specified, this is applied to all future created
toplevels as well. The data in the images is taken as a snapshot at the
time of invocation. If the images are later changed, this is not
reflected to the titlebar icons. Multiple images are accepted to allow
different images sizes (e.g., 16x16 and 32x32) to be provided. The window
manager may scale provided icons to an appropriate size.
On Windows, the images are packed into a Windows icon structure.
This will override an ico specified to wm iconbitmap, and
vice versa.
On X, the images are arranged into the _NET_WM_ICON X property, which
most modern window managers support. A wm iconbitmap may exist
simultaneously. It is recommended to use not more than 2 icons, placing
the larger icon first.
On Macintosh, the first image called is loaded into an OSX-native icon
format, and becomes the application icon in dialogs, the Dock, and
other contexts. At the
script level the command will accept only the first image passed in the
parameters as support for multiple sizes/resolutions on macOS is outside Tk's
scope. Developers should use the largest icon they can support
(preferably 512 pixels) to ensure smooth rendering on the Mac.
- wm iconposition window ?x y?
-
If x and y are specified, they are passed to the window
manager as a hint about where to position the icon for window.
In this case an empty string is returned. If x and y are
specified as empty strings then any existing icon position hint is cancelled.
If neither x nor y is specified, then the command returns
a Tcl list containing two values, which are the current icon position
hints (if no hints are in effect then an empty string is returned).
- wm iconwindow window ?pathName?
-
If pathName is specified, it is the path name for a window to
use as icon for window: when window is iconified then
pathName will be mapped to serve as icon, and when window
is de-iconified then pathName will be unmapped again. If
pathName is specified as an empty string then any existing
icon window association for window will be cancelled. If
the pathName argument is specified then an empty string is
returned. Otherwise the command returns the path name of the
current icon window for window, or an empty string if there
is no icon window currently specified for window.
Button press events are disabled for window as long as it is
an icon window; this is needed in order to allow window managers to
“own”
those events.
Note: not all window managers support the notion of an icon window.
- wm manage widget
-
The widget specified will become a stand alone top-level window. The
window will be decorated with the window managers title bar, etc. Only
frame, labelframe and toplevel widgets can be used
with this command. Attempting to pass any other widget type will raise
an error. Attempting to manage a toplevel widget is benign and
achieves nothing. See also GEOMETRY MANAGEMENT.
- wm maxsize window ?width height?
-
If width and height are specified, they give
the maximum permissible dimensions for window.
For gridded windows the dimensions are specified in
grid units; otherwise they are specified in pixel units.
The window manager will restrict the window's dimensions to be
less than or equal to width and height.
If width and height are
specified, then the command returns an empty string. Otherwise
it returns a Tcl list with two elements, which are the
maximum width and height currently in effect.
The maximum size defaults to the size of the screen.
See the sections on geometry management below for more information.
- wm minsize window ?width height?
-
If width and height are specified, they give the
minimum permissible dimensions for window.
For gridded windows the dimensions are specified in
grid units; otherwise they are specified in pixel units.
The window manager will restrict the window's dimensions to be
greater than or equal to width and height.
If width and height are
specified, then the command returns an empty string. Otherwise
it returns a Tcl list with two elements, which are the
minimum width and height currently in effect.
The minimum size defaults to one pixel in each dimension.
See the sections on geometry management below for more information.
- wm overrideredirect window ?boolean?
-
If boolean is specified, it must have a proper boolean form and
the override-redirect flag for window is set to that value.
If boolean is not specified then 1 or 0 is
returned to indicate whether or not the override-redirect flag
is currently set for window.
Setting the override-redirect flag for a window causes
it to be ignored by the window manager; among other things, this means
that the window will not be reparented from the root window into a
decorative frame and the user will not be able to manipulate the
window using the normal window manager mechanisms.
Note that the override-redirect flag is only guaranteed to be taken notice of
when the window is first mapped or when mapped after the state is changed from
withdrawn to normal. Some, but not all, platforms will take notice at
additional times.
- wm positionfrom window ?who?
-
If who is specified, it must be either program or
user, or an abbreviation of one of these two. It indicates
whether window's current position was requested by the
program or by the user. Many window managers ignore program-requested
initial positions and ask the user to manually position the window; if
user is specified then the window manager should position the
window at the given place without asking the user for assistance.
If who is specified as an empty string, then the current position
source is cancelled.
If who is specified, then the command returns an empty string.
Otherwise it returns user or program to indicate the
source of the window's current position, or an empty string if
no source has been specified yet. Most window managers interpret
“no source”
as equivalent to program.
Tk will automatically set the position source to user
when a wm geometry command is invoked, unless the source has
been set explicitly to program.
- wm protocol window ?name? ?command?
-
This command is used to manage window manager protocols. The name
argument in the wm protocol command is the name of an atom corresponding
to a window manager protocol. Examples include WM_DELETE_WINDOW or
WM_SAVE_YOURSELF or WM_TAKE_FOCUS.
A window manager protocol is a class of messages sent from a window
manager to a Tk application outside of the normal event processing system. The
main example is the WM_DELETE_WINDOW protocol; these messages are sent
when the user clicks the close widget in the title bar of a window. Handlers
for window manager protocols are installed with the wm protocol
command. As a rule, if no handler has been installed for a protocol by the
wm protocol command then all messages of that protocol are ignored. The
WM_DELETE_WINDOW protocol is an exception to this rule. At start-up Tk
installs a handler for this protocol, which responds by destroying the
window. The wm protocol command can be used to replace this default
handler by one which responds differently.
The list of available window manager protocols depends on the window manager,
but all window managers supported by Tk provide WM_DELETE_WINDOW. On the
Windows platform, a WM_SAVE_YOURSELF message is sent on user logout
or system restart.
If both name and command are specified, then command becomes
the handler for the protocol specified by name. The atom for name
will be added to window's WM_PROTOCOLS property to tell the window
manager that the application has a handler for the protocol specified by
name, and command will be invoked in the future whenever the
window manager sends a message of that protocol to the Tk application. In
this case the wm protocol command returns an empty string. If
name is specified but command is not, then the current handler for
name is returned, or an empty string if there is no handler defined for
name (as a special case, the default handler for WM_DELETE_WINDOW
is not returned). If command is specified as an empty string then the
atom for name is removed from the WM_PROTOCOLS property of
window and the handler is destroyed; an empty string is returned.
Lastly, if neither name nor command is specified, the
wm protocol command returns a list of all of the protocols for which
handlers are currently defined for window.
- wm resizable window ?width height?
-
This command controls whether or not the user may interactively
resize a top-level window. If width and height are
specified, they are boolean values that determine whether the
width and height of window may be modified by the user.
In this case the command returns an empty string.
If width and height are omitted then the command
returns a list with two 0/1 elements that indicate whether the
width and height of window are currently resizable.
By default, windows are resizable in both dimensions.
If resizing is disabled, then the window's size will be the size
from the most recent interactive resize or wm geometry
command. If there has been no such operation then
the window's natural size will be used.
- wm sizefrom window ?who?
-
If who is specified, it must be either program or
user, or an abbreviation of one of these two. It indicates
whether window's current size was requested by the
program or by the user. Some window managers ignore program-requested
sizes and ask the user to manually size the window; if
user is specified then the window manager should give the
window its specified size without asking the user for assistance.
If who is specified as an empty string, then the current size
source is cancelled.
If who is specified, then the command returns an empty string.
Otherwise it returns user or window to indicate the
source of the window's current size, or an empty string if
no source has been specified yet. Most window managers interpret
“no source”
as equivalent to program.
- wm stackorder window ?isabove|isbelow window?
-
The stackorder command returns a list of toplevel windows
in stacking order, from lowest to highest. When a single toplevel
window is passed, the returned list recursively includes all of the
window's children that are toplevels. Only those toplevels
that are currently mapped to the screen are returned.
The stackorder command can also be used to determine if one
toplevel is positioned above or below a second toplevel.
When two window arguments separated by either isabove or
isbelow are passed, a boolean result indicates whether
or not the first window is currently above or below the second
window in the stacking order.
- wm state window ?newstate?
-
If newstate is specified, the window will be set to the new state,
otherwise it returns the current state of window: either
normal, iconic, withdrawn, icon, or (Windows and Mac
OS X only) zoomed.
The difference between iconic and icon is that
iconic refers to a window that has been iconified (e.g., with the
wm iconify command) while icon refers to a window whose only
purpose is to serve as the icon for some other window (via the wm
iconwindow command). The icon state cannot be set.
- wm title window ?string?
-
If string is specified, then it will be passed to the window
manager for use as the title for window (the window manager
should display this string in window's title bar). In this
case the command returns an empty string. If string is not
specified then the command returns the current title for the
window. The title for a window defaults to its name.
- wm transient window ?container?
-
If container is specified, then the window manager is informed that
window is a transient window (e.g. pull-down menu) working on
behalf of container (where container is the path name for a
top-level window). If container is specified as an empty string
then window is marked as not being a transient window any more.
Otherwise the command returns the path name of window's current
container, or an empty string if window is not currently a
transient window. A transient window will mirror state changes in the
container and inherit the state of the container when initially mapped. The
directed graph with an edge from each transient to its container must be
acyclic. In particular, it is an error to attempt to make a window a
transient of itself. The window manager may also decorate a transient
window differently, removing some features normally present (e.g.,
minimize and maximize buttons) though this is entirely at the
discretion of the window manager.
- wm withdraw window
-
Arranges for window to be withdrawn from the screen. This
causes the window to be unmapped and forgotten about by the window
manager. If the window
has never been mapped, then this command
causes the window to be mapped in the withdrawn state. Not all
window managers appear to know how to handle windows that are
mapped in the withdrawn state.
Note: it sometimes seems to be necessary to withdraw a
window and then re-map it (e.g. with wm deiconify) to get some
window managers to pay attention to changes in window attributes
such as group.
Normally a top-level window can have any size from one pixel in each
dimension up to the size of its screen.
However, you can use the wm minsize and wm maxsize commands
to limit the range of allowable sizes.
The range set by wm minsize and wm maxsize applies to
all forms of resizing, including the window's natural size as
well as manual resizes and the wm geometry command.
You can also use the command wm resizable to completely
disable interactive resizing in one or both dimensions.
Gridded geometry management provides support for this kind of
application.
Tk (and the window manager) assume that there is a grid of some
sort within the application and that the application should be
resized in terms of grid units rather than pixels.
Gridded geometry management is typically invoked by turning on
the setGrid option for a widget; it can also be invoked
with the wm grid command or by calling Tk_SetGrid.
In each of these approaches the particular widget (or sometimes
code in the application as a whole) specifies the relationship between
integral grid sizes for the window and pixel sizes.
To return to non-gridded geometry management, invoke
wm grid with empty argument strings.
When gridded geometry management is enabled then all the dimensions specified
in wm minsize, wm maxsize, and wm geometry commands
are treated as grid units rather than pixel units.
Interactive resizing is also carried out in even numbers of grid units
rather than pixels.